Memoq MQ-72 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Machines à laver Memoq MQ-72. Memoq MQ-72 User`s manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 1
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
User's Manual
Model : MQ-72N
Thank you for purchasing this product.
* Please read this manual and understand all the
functions before use.
* Please write purchasing date, purchasing place,
etc. in the warranty card.
* Free after-sale service will be not possible with-
out the warranty card.
Made in Korea
For the quality improvement of product, design
and accessory can be changed without notice.
Caution and warning on this product
Naming of each part
ⓐBall pen refill ⓑRefill part
ⓒRotation part ⓓBody part
ⓔRecording switch ⓕMicrophone
ⓖJack(Remote control/Charging)
ⓗLED(Charging/Recording mode)
ⓘRemote control body ⓙEarphone
Preparation before use(Charging)
Warning
* We are not responsible for the loss of recordings
due to the usage, after-sale service, others, etc.
* We are not responsible for the damage by using
this product or claim by the third party.
* Please save important recordings into PC imme-
diately.
* Please do not decompose and adapt this pro-
duct. That can be the cause of fire and failure.
* If you listen to the contents of this product
loudly and long time, hearing ability can be
damaged. Please adjust the volume moderately.
* Please do not use at low and high temperature.
That can be the cause of fire or failure by a leak
by condensation phenomenon.
* Please do not leave this product alone in humid
place or in place exposed to oil. That can be the
cause of fire and failure.
Caution
* To shock or drop the product can be the cause
of failure.
* Please do not wash the surface of product with
alcohol, benzene, thinner, etc.
*This product has built-in rechargeable battery.
*Please use this product after charging.
*Please connect charging cable into the charging
jack of this product and the USB port of PC or
AC adaptor(option) and then charging starts.
(Caution) Please be sure to use AC adaptor
which has acquired the local safety certification.
The defective product by wrong AC adaptor shall
be charged for after-sale service.
Charging status indication
* Charging :
Green LED is lit up during charging.
When charging is completed, green LED blinks.
* Remaining battery check :
When you insert remote controller in the state
of stop, the following will be shown in 3seconds.
1) Low battery(less than 30%) : LED is off.
2) Middle battery(30%~60%) : Green LED blinks
3) High battery(60%~100%) : Green LED is lit up.
Turning off power
*In case of recording, when you move recording
switch to the state of stop, power is turned off.
*In case of playback, when you press the stop(
)
button of remote controller or separate the plug
of remote controller, power is turned off.
*To take custody of product for a long time,
please be sure to take custody after separating
remote controller.
Warranty Card
Product name
Model No.
Purchasing date
Purchasing place
Telephone
Others
Warranty period
Signature
Address
Telephone
Customer
Digital Voice Recorder
1 year
Charging service
- Failure by carless handling in use.
- Failure by user's any internal modification.
- Failure by natural disasters like fire, salt damage,
flood, earthquake, etc.
- Products of which warranty period has ended.
Importer :
Address :
Telephone :
Product Specification
Item Specification
Battery life time
Charging time
Earphone
Size
Weight
Temperature
Continuous recording : about 12 hours, Playback : about 8 hours
about 2 hours 30 minutes
10mW / 32 ohm
Φ12 * 150
26g
0℃~40℃
Product composition
① Body(recorder)
② USB cable
③ Remote controller
④ Earphone
⑤ User's manual
①Plug ②Mode button
③Stop(Power off)button ④Play button
⑤Volume controller ⑥Previous button
⑦Next button ⑧Earphone jack
ⓕ(Side)
ⓗ(Bottom)
*When you move recording switch(ⓔ) to recording
place, recording will start in about 3 seconds.
*During recording, you can monitor it with ear-
phone and check recording status.
*In case of no remaining battery or 99 files, beep
tone is rung through earphone for 5 seconds and
recording is not possible any more.
*
When you remove files, recording is possible again.
REC Stop
*When you press previous(
◀◀
) button or next(
▶▶
)
button shortly during playback, it moves before
and after and is played back according to the
set search mode(file move/search1/search2)
*When you use search function accordingly, you
can find the wanted place easily.
1.File move : When you operate previous(
◀◀
)
button or next(
▶▶
) button, it moves to previous
file or next file.
2.Search1 : When you operate previous(
◀◀
)
button or next(
▶▶
) button, it moves to before
about 20 seconds or after about 20 seconds.
*If you continue to press previous(
◀◀
) button
and less than 20 seconds remain, it moves to
the starting part of file in playback.
*If you continue to press next(
▶▶
) button and
less than 20 seconds remain, it moves to the
starting part of next file.
3.Search2 : When you operate previous(
◀◀
)
button or next(
▶▶
) button, it moves to before
about 2 minutes or after about 2 minutes.
*If you continue to press previous(
◀◀
) button
and less than 2 minutes remain, it moves to the
starting part of file in playback.
*If you continue to press next(
▶▶
) button and less
than 2 minutes remain, it moves to the starting
part of next file.
Search mode setting
When you press the mode(M) button of remote
controller during playback, beep tone occurs per
mode and search mode is converted as following
turns.
Recording mode setting
When you press menu(M) button long more than
3 seconds in the state of stop, LED is lit up or
flashing and then recording mode is changed as
following turns whenever you press play(
▶ll
)
button shortly.
When you press menu(M) button long more than
3 seconds after change, setting is completed.
VOS(Voice operated recording) setting
VOS function is that recorder detects sound in
recording and when sound is not heard in
recording, recording is paused automatically and
when sound is heard, recording starts automati-
cally and enables you to use memory efficiently.
When you press menu(M) button long more than
3 seconds in the state of stop, LED is lit up or
flashing. At this time, whenever you press stop
(
)
button shortly, it is changed as below.
*In case of using VOS function, battery life time
is not increased.
*Default in shipping products is XHQ, VOS OFF.
LED check table per recording mode and VOS mode
XHQ
High sound quality
Blue lit up or flashing
HQ
Standard sound quality
Green lit up or flashing
LP
Long time sound quality
Red lit up or flashing
VOS OFF(lamp lit up)
VOS ON(lamp flashing)
VOS
OFF
ON
XHQ
HQ
LP
Recording
mode
Blue lit up
Green lit up
Red lit up
Blue flashing
Green flashing
Red flashing
Using as a ball pen
When you hold the body(ⓓ) and spin the rotating
part(ⓒ) right and left, ball pen refill comes out or
go in.
For the change of ball pen refill, please hold
rotating part(ⓒ) and continue to turn the part of
pen refill(ⓑ) to the left and when it is separated,
pull ball pen refill out and insert new one into
hole carefully.
* Ball pen refill standard :
BR-8A-4C (67mm, Made by ZEBRA)
1GByte
2GByte
about 8hours
about 16hours
about 33hours
about 35hours
about 70hours
about 140hours
about 70hours
about 141hours
about 283hours
XHQ
HQ
LP
256MByte
Mode/Memory
Body
Remote controller
Recording
Playback
*
Please connect remote controller into the earphone
jack of body and adjust volume to the maximum.
*When you press the play
(
▶ll
)
button of remote
controller, playback starts.
*When you press the play button again, it pauses.
*When you press the stop
(
)
button, playback stops.
*During recording, remote controller does not work.
(Caution) After recording is completed, the
operation of button is not possible for 3seconds.
Move and playback per search mode
Recording time
per recording mode and memory capacity
(Note) In case of the continuous recording more than 5 hours,
this product can separate and save the recording files by the
5 hours for more convenient hearing and file management.
Stop recording
When you move recording switch(ⓔ) to stop place,
recording stops and power is turned off after a while.
Move to
previous file
Move to before
about 20 seconds
Move to before
about 2 minutes
Operation Mode selection Beep tone Previous button Next button
File move
Search function1
Search function2
One time
Two times
Three times
Move to
next file
Move to after
about 20 seconds
Move to after
about 2 minutes
④ Earphone
6411-716-001
③ Remote controller
6412-RC3-001
② USB cable
2167-MQ7-001
FCC Note
Any changes or modifications in construction of this device
which are not expressly approved by the party responsible
for compliance could void the user's authority to operate the
equipment.
FCC Caution
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules.
These limits are designd to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, any, cause harmful interference to radio communi-
cations. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on,
the user is encouraged to correct the interference by one or
more of the following measures ;
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for
help.
*It is the function to introduce the recordings of files.
*When you press play
(
▶ll
)
button more than 3
seconds in the state of stop, the earlier part of each
file from the first file to the last file is played back
automatically 5 seconds each.
*When the recording you want to hear comes out,
please press the play
(
▶ll
)
button shortly and that
file is played back.
File auto search
e
REC
e
STOP
① Body(recorder)
*To save recordings into PC, please connect USB
cable into this product and USB port of PC and
you can check the recordings at "My computer
-> MemoQ -> VOICE folder"
*You can move, copy, delete, play back, format
files in the same way as USB flash drive.
<Screen connected as removable disk on PC: memoQ(F:)>
F:
<Recorder folder structure>
- Folder to save recording files
*When you press stop(
) button more than 3
seconds in the state of stop, beep sound comes
out and recorded contents are played back to
confirm before deletion.
*If the contents you want to delete are correct,
please press stop(
) button again shortly and
delete the file(at this time, beep tone comes out
again for 2 seconds).
*If the contents you want to delete are wrong,
please cancel it by pressing other button.
When you press the previous(
◀◀
) button or
next(
▶▶
) button more than 3 seconds during
playback, the first recording file or the last
recording file is played back.
Playback of first recording file/last recording file
MY DOCUMENT
WALLPAPER
MY COMPUTER
LOCAL DISC (C:)
DVD/CD-RW DRIVE (D:)
(Caution) Before connecting it into PC USB to
transfer files, please check whether the recording
switch is in the position of stop.
Deleting file by remote controller
Transmitting file into PC
Vue de la page 0
1

Résumé du contenu

Page 1 - User's Manual

User's ManualModel : MQ-72NThank you for purchasing this product. * Please read this manual and understand all the functions before use.* Pleas

Commentaires sur ces manuels

Pas de commentaire